Managed Switch CLI Manual, Release 8.0
Switching Commands
3-176
v1.0, July 2009
Source: local
Priority: low
show lldp med remote-device
This command displays summary information about remote devices that transmit current LLDP
MED data to the system. You can show information about LLDP remote data received on all ports
or on a specific port.
Example: The following shows example CLI display output for the command.
(Switch) #show lldp med remote-device all
LLDP MED Remote Device Summary
Local
Interface Remote ID Device Class
--------- --------- ------------
1/0/8
1
Class I
1/0/9
2
Not Defined
1/0/10 3
Class
II
1/0/11 4
Class
III
1/0/12
5
Network Con
Format
show lldp med remote-device
{<unit/slot/port> | all}
Mode
Privileged EXEC
Term
Definition
Interface
The interface in a unit/slot/port format.
Device Class
The Remote device’s MED Classification. There are four different kinds of devices, three
of them represent the actual end points (classified as Class I Generic [IP Communication
Controller etc.], Class II Media [Conference Bridge etc.], Class III Communication [IP
Telephone etc]). The fourth device is Network Connectivity Device, which is typically a
LAN Switch/Router, IEEE 802.1 Bridge, IEEE 802.11 Wireless Access Point etc.
Содержание FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Страница 4: ...v1 0 July 2009 iv...
