NETGEAR FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch, Руководство CLI

Страница: 19 / 558

Managed Switch CLI Manual, Release 8.0
Using the Command-Line Interface 1-7
v1.0, July 2009
Table 6 explains how to enter or exit each mode.
TACACS Config Switch (Tacacs)# Contains commands to configure properties for
the TACACS servers.
DHCP Pool
Config Switch (Config dhcp-pool)# Contains the DHCP server IP address pool
configuration commands.
DHCPv6 Pool
Config Switch (Config dhcp6-pool)# Contains the DHCPv6 server IPv6 address pool
configuration commands.
Stack Global
Config Mode Switch (Config stack)# Allows you to access the Stack Global Config
Mode.
ARP Access-List
Config Mode Switch (Config-arp-access-list)# Contains commands to add ARP ACL rules in
an ARP Access List.
Table 6. CLI Mode Access and Exit
Command Mode Access Method Exit or Access Previous Mode
User EXEC This is the first level of access. To exit, enter
logout
.
Privileged EXEC From the User EXEC mode, enter
enable
.
To exit to the User EXEC mode, enter
exit
or
press
Ctrl-Z.
Global Config From the Privileged EXEC mode,
enter
configure.
To exit to the Privileged EXEC mode, enter
exit
,
or press
Ctrl-Z
.
VLAN Config From the Privileged EXEC mode,
enter
vlan database.
To exit to the Privileged EXEC mode, enter
exit
,
or press
Ctrl-Z
.
Interface Config From the Global Config mode,
enter
interface <unit/slot/port>
or
interface loopback <id>
or
interface tunnel <id>
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Line Config From the Global Config mode,
enter
lineconfig
.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Policy-Map
Config From the Global Config mode,
enter
policy-map <name> in
.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Policy-Class-Map
Config From the Policy Map mode enter
class
.
To exit to the Policy Map mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Table 5. CLI Command Modes (continued)
Command Mode Prompt Mode Description