Managed Switch CLI Manual, Release 8.0
Quality of Service (QoS) Commands
5-9
v1.0, July 2009
A given class definition can contain a maximum of one reference to another class. You can
combine the reference with other match criteria. The referenced class is truly a reference and not a
copy since additions to a referenced class affect all classes that reference it. Changes to any class
definition currently referenced by any other class must result in valid class definitions for all
derived classes, otherwise the switch rejects the change. You can remove a class reference from a
class definition.
The only way to remove an individual match criterion from an existing class definition is to delete
the class and re-create it.
diffserv
This command sets the DiffServ operational mode to active. While disabled, the DiffServ
configuration is retained and can be changed, but it is not activated. When enabled, DiffServ
services are activated.
no diffserv
This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ
configuration is retained and can be changed, but it is not activated. When enabled, DiffServ
services are activated.
Note:
The mark possibilities for policing include CoS, IP DSCP, and IP Precedence.
While the latter two are only meaningful for IP packet types, CoS marking is
allowed for both IP and non-IP packets, since it updates the 802.1p user priority
field contained in the VLAN tag of the layer 2 packet header.
Format
diffserv
Mode
Global Config
Format
no diffserv
Mode
Global Config
Содержание FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Страница 4: ...v1 0 July 2009 iv...
