NETGEAR FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch, Руководство CLI

Страница: 348 / 558

Managed Switch CLI Manual, Release 8.0
Utility Commands 6-31
v1.0, July 2009
copy
The copy command uploads and downloads files to and from the switch. You can also use the
copy command to manage the dual images ( image1 and image2 ) on the file system. Upload and
download files from a server by using TFTP or Xmodem. SFTP and SCP are available as
additional transfer methods if the software package supports secure management.
Replace the
<source>
and
<destination>
parameters with the options in table below. For
the
<url>
source or destination, use one of the following values:
{xmodem | tftp://<ipaddr|hostname>|<ip6address|hostname>/<filepath>/<filename>
[noval]
| sftp|scp://<username>@<ipaddr>|<ipv6address>|<filepath>|<filename>}
For TFTP, SFTP and SCP, the
<ipaddr|hostname>
parameter is the IP address or host name
of the server,
<filepath>
is the path to the file, and
<filename>
is the name of the file you
want to upload or download. For SFTP and SCP, the <username> parameter is the username for
logging into the remote server via SSH.
For platforms that support a USB device, the
copy
command can be used to transfer files
from and to the USB device. The syntax for the USB file is:
usb://<filename>
. The
USB device can be either a source or destination in the copy command. It cannot be used
as both source and destination in a given
copy
command.
Parameters for the
copy
command are listed int the following table:
Format
copy <source> <destination>
Mode Privileged EXEC
Note:
< ip6address >
is also a valid parameter for routing packages that support IPv6.
Warning: Remember to upload the existing Switch CLI.cfg file off the switch prior to
loading a new release image in order to make a backup.
Source Destination Description
nvram:backup-config nvram:startup-config Copies the backup configuration to the startup
configuration.
nvram:clibanner <url> Copies the CLI banner to a server.