Ness IDTECK iCON100, Руководство пользователя

Страница: 7 / 60

101-000 -7- Users Manual
IDTeck – iCON 1 DOOR ACCESS CONTROLLER
3. PRODUCT OVERVIEW
3.1 FUNCTIONS
Stand-Alone Operation
The NESS - IDTeck iCON100 is capable of having two readers and one Door Control. The unit
receives card ID numbers from the proximity readers and determines whether or not to unlock the
door. When an input signal is entered, for example from a sensor being activated or an exit button
pressed, the controller generates and logs an appropriate response by input signals. All events are
stored into the memory buffers and sent to the host computer. The access controller is a true stand-
alone device that, in the event of malfunction, will not affect to other units when used in conjunction
with one another.
Operation with Host Computer
All event transactions can be managed via the host computer. The data transmitted from the controller
can be displayed and stored on the host PC.
Data Backup
The controller retains all user information and event data for 30 days, even in the event of power
failure.
CAUTION: Battery Jumper must be set correctly before the unit is running.
(See the INSTALLATION section)
Keypad
If the NESS - IDTeck iCON100 is not connected to a host PC, the integrated keypad and LCD display
module can also be used for the entire programming process manually.
Anti-Pass-Back
Using an additional proximity reader for exiting, the Anti-Pass-Back mode can be set. APB only
allows exit for the user once they have gotten into the door first and it doesn’t allow any user trying to
enter twice or exit twice.
Input/Output
The NESS - iCON100 has five built-in inputs and four outputs (two relay outputs and two TTL
outputs), which can be used to manipulate a wide variety of controls.