manualshive.com logo in svg

Ness IDTECK iCON100, Руководство пользователя

Поделиться
Скачать
Ness IDTECK iCON100 Скачать руководство пользователя страница 50

 

 

 

101-000                                                 -50-                                               Users Manual

 

IDTeck – iCON 1 DOOR ACCESS CONTROLLER 

 

 

 

   

 

 

 

 

 

9.4.4 LCD TEST

 

 

 

 

 

 

 

 

 

 

9.4.5 KEYPAD TEST

 

 

 

 

 

 

 

     

 

 

9.4.6 READER TEST

 

 

 

 

 

 

 

 

Last  Update 

Press any key... 

LCD   TEST 

 

READER  TEST 

 

0123456789ABCDEF 

KEYPAD TEST 

   

Scanning ... 

 

☞

. Press the <ENT> key to continue the test. The LCD will display 

all characters on the screen.

 

☞

. When this test is done, the LCD will show “Last Update Press 
any key…” then press any key to return to the setup menu.

 

☞

. Press the <ENT> key to start the keypad test.

 

☞

. The LCD will display “0123456789ABCDEF” on the bottom line 
of the LCD. Press each key from the keypad which will then cause 
that key will to disappear from the LCD. Note that the F1 key is 
“A”, F2 key is “B”, F3 key is “C”, F4 key is “D”, ESC key is “E” 
and ENT key is “F” on the screen. After the test is done, it returns 
to the setup menu.

 

☞

. Press the <ENT> key for the reader test. 

☞

. The LCD will display “Scanning…” as it trys to read the cards. 

Present the card to one of the readers.

 

OUTPUT 5 

Press any key.. 

OUTPUT TEST 

 

☞

. To test the outputs, press the <ENT> key. 

☞

.

 The first 2 tests are for output relays (Relay# 1~Relay #2). It will 

switch them on and off and you’ll be able to hear the mechanical 
sound of relays. The following two tests are for TTL outputs. 
The last test is for the built-in buzzer test, which makes two 
beeping sounds. Press any key to return to the setup menu. 

Содержание IDTECK iCON100





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды