Ness IDTECK iCON100, Руководство пользователя

Страница: 13 / 60

101-000 -13- Users Manual
IDTeck – iCON 1 DOOR ACCESS CONTROLLER

DOOR HINGE
- Metal door (Electric Lock): Protect lock line between door and lock applying door hinge or door
cord.
- Glass door: Generally, a door hinge is not used, but use a bracket (cover) on the bottom of the
door for the door cord.

DOOR LOCK

Metal door
- Choose door type: Electric striker or EM lock depending on the direction that the door opens.
- Door opening outwards – EM type is recommend.
- Door opening inwards – Electric type is recommend.
 Glass door
- Use deadbolt type
- In case of the doorframe on the upper side of the door, make a lock hole on the doorframe
before installing the doorframe.
- In case of doorframe on the bottom side of the door, use lock bracket and door cord.
- Place hinge on the very center of the door and then make a lock hole.
4.2 CHECK POINTS DURING INSTALLATION
4.2.1 TERMINATING RESISTANCE
If you use an RS422/RS485 communication method, install a terminating resistor in order to
decrease noise of the communication cable.
 It helps data communication when there is noise.

100 ~ 120 Ω may be used.
 Connect the resistor to the first and last device connected in the line.
CAUTION
: In the case of using a terminating resistor, note that signal level as well as noise is
decreased. Only use when needed.