NERI SNR-BD, Руководство пользователя

Страница: 32 / 47

32
N028 G01 V-5
N029 G99 - Subprogram two return.
Note: Subprogram can call subprogram(named nesting), System permit subprogram that have five
nesting.
8) G22/G80 Cycle sentence
This instruction can be used to run program cycle, G22 is the start that cycle body, and specified
the cycle times L. G80 is the finished sign of cycle body. This instruction can nesting cycle, but
don’t allow over five. G22 and G80 make up a cycle body.
Format: G22 Ln_
（
（ （
（
L is the specified times
）
） ）
）
Cycle body
G80
（ （ （ （
Sign of cycle body finish
） ） ） ）
Example: N000 G92 X100 Y100
N001 G00 X60 Y80
N002 G22 L5 - First layer cycle starting
N003 G00 V50 U-25
N004 G22 L5 - Twice layer cycle starting
N005 G01 U5 V-10
N006 G80 - Twice layer cycle finish
N007 G80 - First layer cycle finish
N008 G28
N009 M02
9) G81 Machining piece add one
This instruction can make the machining piece add one.
Format: G81
3.4 M function and configuration files
1) M function
M00 Program pause instruction, Press
【 【 【 【
Start
】 】 】 】
, program will continue running.
M02 Program finish instruction, program is waiting state after run this.
M30 Same to M02
M10/M11 Acetylene valve on-off,M10(On),M11(Off)
M12/M13 Cutting oxygen valve on-off,M12(On),M13(Off)
M14/M15 Cutting-gun rising on-off,M14(On),M15(Off)
www.EngineeringBooksPdf.com