NERI SNR-BD, Руководство пользователя

Страница: 20 / 47

20
Every function item save parameter as follow:
Speed ---- Start speed
,
Adjust time
，
Max speed.
Adjustment ---- Software limit position
，
Origin
，
reverse clearance
，
reference point
Control Control Control Control---
-Machining speed limit, Ignition delay, Preheat delay, Cutting gun rising delay,
Cutting gun falling delay, Perforation cutting gun rising delay, Perforation cutting gun falling
delay.
System ----Each axis’s electric gear, Driver’s subdivision.
Save ----Save the changed parameters to parameter area.
2.5.1 Speed parameter
Press
【
F2
】
and select
（
refer picture below
）
2.5.2 Adjust parameter
Press
【
F3
】
and select adjust parameters
（
refer picture below
），
Among these :
Speed parameter setting
Start speed
：
X 00250 Y 00250
Adjust time
：
X 00040 Y 00040
Max speed limit
：
X 05000 Y 05000
Note
：
time’s unit is one percent second
Cutter Speed Adjust
Control System Save
Speed
Tim
e
Start speed
Adjust time
Adjust time
Max speed
Start speed
Means of each parameter refer left
picture:
Start speed and max speed ‘s unit
is mm/minute
time’s unit is one percent second
00040 express 0.4 second.
The max speed limit regulate the
max speed of by-hand and G00
。
www.EngineeringBooksPdf.com