NERI SNR-BD, Руководство пользователя

Страница: 23 / 47

23
M—Denominator after simplified.
Micrometer thread pitch’s unit
：
mm
；
Stepping angle unit
：
angel
；
Transmission
＝
Z1/Z2
＝
Motor’s rotate speed
／
spindle rotate speed.
Formula can also be written:
N / M =
Pulse equivalent weight
= Micrometer thread pitch*1000/P
ulse number of
step motor that spindle rotate one circle
2.6 Program editing
This system program edit have two districts: Machining program and user program, refer
picture below. There are battery to protect data from missing.
Machining program edit area : Current working program area ,only one current program.
Once machining program be added from user program area to machining area(or new program),
Regardless of new or modification executed in edit area and need not save program by saving
means. Only when need change new program, the current program is saved to user program area
by
【 【 【 【
F3
】 】 】 】
,New or add new machining program
【 【 【 【
F2
】 】 】 】
from user program area.
Program space: 64K bites.
Number of user program : Save 64 user programs at best, but affected by the space of user
program, When the user’s program is long, the number of user program are saved will reduce
relatively. When the user’s program is short, the number of user program are not over 64, even
though there have space.
Length of machining program: The max line is 540 that system supported.
Under main menu
，
press
【
F3
】
,you can enter into edit function, refer the picture below:
001: G92 X0 Y100
002: G00 X-20
003: G01 X100 Y30
004: M03
005: G04 L100
006:M02
M
ac
h
in
in
g
a
re
a
Machinin
g program
edit area
User
program
area
www.EngineeringBooksPdf.com