NERI SNR-BD, Руководство пользователя

Страница: 24 / 47

24
There are 6 items after enter into program edit state, function as follow:
1) 【 【 【 【FFFF1111】 】 】 】--------
New program
，
Clear the area of program edit and start editing new machining
program.
2) 【 【 【 【F2 F2 F2 F2】 】 】 】-- ---- --
Call program
，
Call the existent program to the area of machining program edit
and you can modify it.
3) 【
【 【
【F3
F3 F3
F3】
】 】
】--
----
--
Save the program of machining edit area to user’s program area.
4) 【 【 【 【F4 F4 F4 F4】 】 】 】-- ---- --
Delete existent program from user’s program area.
5) 【 【 【 【F5 F5 F5 F5】 】 】 】-- ---- --
Delete the line of current edit program.
6)
【 【 【 【F6 F6 F6 F6】 】 】 】-- ---- --
You can receive or send user program to computer or CNC system.
2.6.1 Edit 2.6.1 Edit 2.6.1 Edit 2.6.1 Edit
Enter into edit function, the current machining program will be displayed. You should pay
attention to the several items as follow:
1
）
The faceplate keys have double kinds. One is compound key, the other is single function
key. Usually press the compound key is the value of lower case, if you firstly press
【
Shift
】
,then press compound key is the value of upper case, this function is effect only
under program editing state.
2
）
Cursor move up and down: When cursor move up and down, the cursor will lie in the first
line automatically. The cursor will move one line each press. When the cursor move out
the first line of screen, if the front have program again, the screen will roll one line; When
cursor move out the last line, if the last have program, the screen will roll one line
backward.
3
）
Cursor move left and right: The cursor will move one character each press. When move
to the first line, still press left is not effect. When move to the last, still press right is not
effect.
4
）
Press
【
F
↓】
,Cursor will move right to last line.
5
）
Turn page up and down: Press
【
Pagup / S
↑】or【
Pagdn / S
↓】,
the screen will turn page
forward or backward.
New Add Save Delete
Delete line Transfer
www.EngineeringBooksPdf.com