NERI SNR-BD, Руководство пользователя

Страница: 28 / 47

28
3.3 G
（
（ （
（
Basic prepare instruction
）
） ）
）
1) G92 reference point setting
When you set the program running, you must put the coordinate value of machining start
（
reference point
）
to the start of program, and set use definitely coordinates.
Format: G92 Xn Yn
If the content of X and Y don’t follow G92, Current coordinates of X and Y be regarded as
reference point. When use the origin of machining tool to locate, the content of X and Z don’t
follow G92.
2) G00 dot moving
This instruction can carry out getting to specify position quickly. When two axis all have
displacement, System will move straight from the start to destination by the most limited speed
multiply magnification. When G00 exerting
，
it will be affected by speed magnification.
Format
：
： ：
：
G00 X[U]n Z[W]n
or G00 PPn
+
Y
+X
+Y
+280
＋
120
＋Ｘ
Position of current cutting-gun
Position of anticipate cutting-gun
Example
：
G92 X0 Y0
G00 X120 Y280
(or G00 U120 V280)
M02
www.EngineeringBooksPdf.com