NERI SNR-BD, Руководство пользователя

Страница: 16 / 47

16
3．【Pgup/S↑】,【Pgdn/S↓】
Control cutting gun rising or falling ,Press key, cutting gun rising
or falling, loose it will stop.
4
．【
Stop
】： ： ： ：
Outside button
（
refer chapter 6.1 “outside input interface”
），
Signal can derive
from input port. All stop when this key is effect.
Return and renew machining according to original track
During machining, because of cutting incompletely, need return and renew machining, You
can deal with as follow:
1
．
Press
【
Pause
】
, system will decrease speed till stop and display
＂
pause
＂
sign. Prompt
（
Graphics mode
）＂Ｆ２
manual
Ｆ６
return
＂，
Press
【
F2
】
can enter into manual compensation
function
（
refer below
），
press
【
F6
】
can enter into return and renew machining function.
If select
【
F6
】
, System will hint:
Return
＜－
＜－ ＜－
＜－ －＞
－＞ －＞
－＞
forward
Indication: Press
【←】
, System will return along original trace. Press
【→】
, System will forward
along original trace base of return. During return, if reach position that want to return, You can
press
【
Pause
】
again, repeat the above-mentioned procedure, select again keep on returning or
forward.
２．
You may press
【
Pause
】
again when system get to the return position
，
After system stop
Steady, you can press the strong current key correspondingly
（
like Preheat perforation, open
cutting oxygen etc.
），
Press
【→】
again, and select machining forward.
３．
Above-mentioned operate can run repeatedly till get the satisfactory effect.
Break recover and power cut disposal
When system pause by man-made, it will save automatically the current working trace
(cutting tip’s position) as a break. This break will be saved forever, regardless power off. Power on
again or enter into automatic mode, if only the current program is not changed you can press
【
G
】
key to resume break. When find the break, system will hint
＂
pause
＂
state, You can press the
strong current function key correspondingly (such as preheat perforation, open cutting oxygen
etc.), Press
【
Startup
】
again, system will keep on running from break’s position.
www.EngineeringBooksPdf.com