NERI SNR-BD, Руководство пользователя

Страница: 30 / 47

30
Illustration:
The value of I and J is increment that relative to start point of X and Y direction
center.(Center subtract start point).
R is radius.(R is positive value, When arc
≤
180
°
, you can use R to represent radius.
If you specified I
，
J, no R. If you specified R, no I and J.
5) G04 Pause / delay instruction
This instruction can be used for set time delay, When program run this instruction, The program
will delay according to the L defined. Unit is second.
Format: G04 Ln
Example:G04 L2.4
（
delay 2.4 second
）
When during run G04, Press
【
Start
】
key, it will stop delay, continue to run program that behind
G04.Press
【
Quit
】
key, it will stop the run of current program.
6) G26,G27,G28 return to reference point
Implement this instruction, Cutter can return to reference point automatically.
Format: G26
Ｘ
Ｘ Ｘ
Ｘ
axis return to reference point
G27
Ｚ
Ｚ Ｚ
Ｚ
axis return to reference point
G28
Ｘ Ｘ Ｘ Ｘ
and Z axis return to reference point simultaneously
7
50
+100 O +40
+16
+
+X
G0
O’
Example(G02):
G92 X0 Y0
G00 X40 Y50
G02 X160 V0 I60 J20
G28
M02
Example
（
G03
）
:
G92 X0 Y0
G00 X40 Y50
G03 X160 V0 I60 J20
（
or G03 X160 V0 R63.25
）
G28
G0
The position of current
cutting-gun.
The position of anticipative
cutting-gun.
www.EngineeringBooksPdf.com