NERI SNR-BD, Руководство пользователя

Страница: 26 / 47

26
2.6.5 Delete program 2.6.5 Delete program 2.6.5 Delete program 2.6.5 Delete program
Press
【
F4
】
and select deleting the program of user program area. The system will listed the
existent program’s name, and the cursor will stay the current name of program. Move the cursor,
you can select various program. After press
【
Enter
】,
The selected program will be deleted from
user editing area; If press
【
Quit
】
,it will give up the function of deleting.
2.6.6 2.6.6 2.6.6 2.6.6
Transport program
Press
【
F6
】
and select transport function. The system supports RS-232 communication. The
program that transported is managed in machining edit area. Step as follow:
1
．
Connect well two machines that will transport program by cable.
2
．
Ensure the receive machine have no documents (if have, please first save it) that you want to
reserve in machining edit area. Select again the function of transport—receive. The receiver
should is receiving state.
3
．
On the program transporter, Call the program that will be sent out to machining editing area,
then select Edit
— — — —
Transport
— — — —
Send out
。
4．
When transporting finished
，
Save the received programs.
Chapter three Instruction system
3.1 3.1 3.1 3.1
Programming symbol explanation
Every action of CNC machining should run according to regulated program. Every
machining program is composed of some instruction-segment, Every instruction-segment is
composed of some function-word. Every function-word must start by character, followed by
parameter.
www.EngineeringBooksPdf.com