NERI SNR-BD, Руководство пользователя

Страница: 19 / 47

19
5.Press
【
F5
】
,System will control cutting tip return to reference point.
6.Press
【
G
】
will change the value of inch increment, hint: input increment value, then press enter
key, this value will be saved till changed or power off.
7
.Press
【
X
】
key to change value of X .hint: input coordinate of
Ｘ（
Y
）
axis, then press enter key,
the coordinate of X and Y are changed at once; Press
【
Y
】
key to change value of Y .hint: input
coordinate of Y axis, then press enter key, the coordinate of Y are changed at once
8.Press
【
F6
】
key
，
system enters into test-position function. Test-position is testing the precision
distance from the current position of cutting tip to the origin of machine tool. Concrete usage:
Firstly, You should aim the cutting tip to a special point
（
such as reference point
），
test the
current coordinate and modified
（
press
“
X/Y
”），Press【F6】key,
cutting tip begin to return to
origin of machine tool and save it as machine’s origin of parameter. Return-position is same to
test-position from shape, but their results are not same: Return-position is that send the origin
value of machine tool to current coordinates , but test-position is that send the current
coordinate to origin of machine tool.
9.Press
【
F
↑】
and
【
F
↓】
,you can adjust the manual magnification. Note: Manual and automatic
magnification are saved respectively till changed and the value immune to influence of power
off.
10.Press
【
Pgup/S
↑】，【
Pgdn/S
↓】
and strong-current key ,their usage is same to
auto mode.
2.5 Parameter set
Under main working picture, Press
【
F4
】
can enter into parameter set function.
Displaying:
Parameter set
Speed Adjustment Control
System Save
www.EngineeringBooksPdf.com