NERI SNR-BD, Руководство пользователя

Страница: 17 / 47

17
After machining pause, if you want to quit automatic state and enter into manual state to
move cutting tip(whatever how much)
，
When press
【
G
】
key to begin resuming break, system will
move the cutting tip to the position of break firstly, then resume break. Of course, if you changed
the current coordinates by hand, the break will not be resumed normally.
If during machining, you encounter failure of electricity, you can enter into
automatic mode firstly after get back electric power. Press
【
F3
】
key will set the current
coordinate as break and recover like above-mentioned. Attention: This moment you must not move
the cutting tip or set the current coordinate.
Only pause operation can generate break.
2.4 Manual function
Under main picture, press
【
F2
】
enter into manual mode, display:
Display under manual function
Like automatic mode
，
but have any distinction:
1．
Under left of the menu display the current increment value.
2．
Under right hint
：
Press
【
G
】
, you can modify the inch increment.
3
．
Press
【
X
】
, you can modify the X value. Press
【
Y
】
, you can modify the Y value.
Speed: F
×
100%=0000 Program
：
0001 Number
：
0000
Preheat
：
0850
Inch increment
：
0001.000
Inch moving Manual Pulse
MDI
Return
parameter
Test position
X +00000.000
Y +00000.000
Manual operating
Acetylene closed
Preheat closed
Cutting closed
Cutting tip stop
M00
U 0000.000
V 0000.000
XY coordinate
G inch increment
www.EngineeringBooksPdf.com