![background image](http://html.mh-extra.com/html/nec/xen-ipk-digital-telephone/xen-ipk-digital-telephone_programming-manual_248366071.webp)
Xen IPK
Programming Manual
1-1-18, System Speed Dial Restriction by Tenant
DRAFT 3
Chapter 1 – 51
Doc. No.: 8194
- Release 2.0
December 200
4
Programming Procedures
1
Go off-line.
2
Press LK1 +
LK1 +
AH
to access the Memory Block.
3
Press the corresponding CO/PBX line key to change the tenant number.
Note:
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data
S
to move to the next page
T
to move to the previous page
Each time a CO/PBX line key is pressed, the LED toggles between On and Off.
Default Values
All System Speed Dial buffers can
be dialled from any tenant.
4
After entering all pages for the selected Speed Dial Buffer No., press
N
to write the data. The next Speed Dial Buffer
No. is displayed.
5
After entering data for all of the Speed Dial Buffer Nos., press
N
to write the data for the last Speed Dial Buffer No. The
next Memory Block is displayed.
6
Press
P
to go back on-line.
Related Programming
M.B. Number
Memory Block Name
Speed Dial Number/Name Display Selection
Telephone to Tenant Assignment
Speed Dial buffers have nine groups. These groups are listed in the table
Speed Dial
Buffer No.
Speed Dial Number
80 Codes
1000 Codes
0X
00~09
000~099
1X
10~19
100~199
6X
60~69
600~699
7X
70~79
700~799
8X
N/A
800~899
∼
∼
∼
X = Any digit 0~9
CO/PBX
Line LED
Off
On
Data
Restricted
Not restricted