December 2004
NEC Business Solutions Ltd
38 – Chapter 1
DRAFT 3
Start Timer Selection, 1-1-05
Doc. No.: 81
94 - Release 2.0
December 2004
4
Press
N
to write the data and display the next Memory Block.
5
Program the next Memory Block or press
P
to go back on-line.
Related Programming
M.B. Number
Memory Block Name
SMDR Valid Call Timer Assignment
4-71
Time Class Assignment for Telephone Mode (R2000 and above)
N
This timer is used for three different features with functions described below:
Elapsed Call Timer:
The time needed after dialling until the Elapsed Call Timer is started and displayed on a Multiline
Terminal.
SMDR Start Timer:
The time needed after dialling until the SMDR Valid Call Timer is started. Refer to Memory Block 1-
5-25 SMDR Valid Call Timer Assignment. For outgoing calls, both timers (SMDR Start Timer and
SMDR Valid Call Timer Assignment) must elapse before a call record is generated.
Lines set as “YES” in Memory Block 3-72, as having Reversal on Answer, do not follow this Memory Block.
Programming Procedures
(Continued)
