326 – Chapter 1
DRAFT 3
Centralised BLF Receive Extension Number Assignment, 1-15-18
December 2004
NEC Business Solutions Ltd
Doc.
No.: 8194 -
Release 2.0
Dece
mber 2004
1-15-18
System Mode
1
Submode
15
Data No.
18
PC Programming
+ AW
Centralised BLF Receive
Extension Number
Assignment
General Description
Use this Memory Block to assign the Extension Numbers of remote systems to receive
Centralised BLF messages.
System Software R2000 or higher is required.
Display
Programming Procedures
1
Go off-line.
2
Press LK1 + LK15 +
AH
to access the Memory Block.
3
Use dial pad keys to enter Table number and Extension No.
Note:
Use the following to enter data:
J
to move cursor left.
L
to move cursor right.
K
~
I
to enter numeric data.
Three Digit Extension Number: 000~999
Four Digit Extension Number: 0000~9999
Tables 001~120 can be assigned.
Default Values:
All Tables Not Specified
4
Press
N
to write the data, and display the next Memory Block.
5
Repeat Steps 3 and 4 for each Table No.
6
Program the next Memory Block or p
ress
P
to go back on-line.
Related Programming
M.B. Number
Memory Block Name
7-1
Card Interface Slot Assignment
1-8-08
Class of Service (Station) Feature Selection 2 (Page 6, LK 2)
1-15-00
K-CCIS Main/Remote Office Selection
1-15-02
Common Signal Channel Assignment
1-15-03
Originating Point Code Assignment
1-15-04
Destination Point Code Assignment
1-15-05
Destination Point Code Transfer Assignment
1 8 : B L F
0 0 1 = _
T I M E
D I S P L A Y
Data
No.
Title
Extension
Number
Table
Number
001~120