NEC XEN IPK DIGITAL TELEPHONE, Руководство по программированию

Страница: 415 / 638

3-64, DIT Night Mode Delay Answer Enable
DRAFT 3
Chapter 1 – 395
Xen IPK Programming Manual
Doc. No
.: 8194 -
Rele
ase 2.
0
December
2004
3-64
System Mode
3
Submode
—
Data No.
64
PC Programming
+ BCT
DIT Night Mode Delay
Answer Enable
General Description
This Memory Block is used to specify whether or not the DIT Delay Answer Timer shall apply to
CO/PBX calls received when the system is in Night Mode.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates
the default setting.
No Yes
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK3 +
N
+ DD to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
Note: Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
R
to go to the next CO/PBX Line No.
4 Press
N
to write the data.
5 Press
P
to go back on-line.
Related Programming
M.B. Number Memory Block Name
3-62 DIT Delay Answer Timer Selection
N
1. The DIT Delay Answer Time specified in MB , 3-62 shall apply for this purpose.
2. If set to YES, incoming CO/PBX calls during Night Mode will ring for the duration specified in MB , 3-62 before
changing to DIT status.
3. If set to NO, incoming CO/PBX calls during Night Mode will immediately change to DIT status regardless of the setting
in MB , 3-52.
4. This setting only applies to those CO/PBX lines assigned with the DIT facility in MB , 3-44 and MB , 3-45.
1 1 / 6 4 : N T M O D N 0
T I M E D I S P L A Y
CO/PBX
No.
(01~64)
Data
No.
Title
Setting
Data