![background image](http://html.mh-extra.com/html/nec/xen-ipk-digital-telephone/xen-ipk-digital-telephone_programming-manual_248366163.webp)
Xen IPK
Programming Manual
1-2-22, Call Forward No Answer Timer Selection
DRAFT 3
Chapter 1 – 143
Doc. No.: 8194
- Release 2.0
December 200
4
3
Use the dial pad to enter the time required.
Note
:
J
to move cursor left.
L
to move cursor right.
Setting Data (Allow): Class 1 to Class 4: 01 to 99 sec
Default values:
Class 1 to Class 4 = 12 secs
4
Press
N
to write the data.
5
Press
P
to go back on-line.
Related Programming
M.B. Number
Memory Block Name
Access Code (1-Digit) Assignment
Access Code (2-Digit) Assignment
Intercom Call Voice/Tone Signal Selection
Class of Service (Station) Feature Selection 2
Station to Class of Service Feature Assignment
4-42
Call Forward-Busy Immediately/Delay Selection
4-71
Time Class Assignment for Telephone Mode (R2000 and above)
N
1. For ACD Call Forward No Answer time refer to Memory Block , 1-8-40.
2. This will effect ICM, DIT, DID, TLI calls. CO Ringing Assigned Calls do not follow this Memory Block setting.
Programming Procedures (Continued)