Using the Hardware 4-11
NOTE
If you install a second 12.5mm hard disk drive in the Versa-
Bay II, it can be set to either master or slave.
If you install an optional 19mm hard disk drive via the NEC Versa
4000 HDD Cradle Pak, it becomes the master drive from which the
system boots. (Note that the 12.5mm hard disk or the CD-ROM can
be set either to master or slave.) For ordering information see the
on-line
Options Catalog.
Use the optional VersaBay II Adapter Kit to insert either an old or
new style hard disk drive (12.5mm or 19mm) into a docking station
or a desktop. For ordering information see the on-line
Options
Catalog.
Add another hard disk drive or second Li-Ion battery pack as follows.
1.
Remove the diskette drive or CD-ROM reader from the VersaBay II as
described in the previous section, steps 1 through 6.
2.
Prepare your option for installation as follows:
To install a battery pack, first connect it to the bay adapter that came
with the battery. (Follow the instructions that came with the battery
pack.)
To install a hard disk drive, first connect it to the appropriate bay
adapter. (Follow the instructions that come with the adapter.)
3.
Align the option and its carrier in the VersaBay II and push it in until the
option clicks into place.
4.
Turn the system over and power on. The system should automatically
recognize the newly installed option.
6x CD-ROM Reader
Your NEC Versa 4200 may come with a 6x-CD-ROM reader. The CD-
ROM reader is assigned the next available drive letter.
Use the CD-ROM reader to load and start programs from a compact disc
(CD). You can also use the CD-ROM reader to play audio CDs.
