Introducing the Software 2-7
NOTE
Please note the following if you request the Windows for
Workgroups pre-configured software from the NEC Fulfillment
Center. The replacement pre-configured software that will be sent to
you will contain certain software utilities and applications that were
not included on the system when you purchased your system.
If you purchased this computer outside of the U.S. and you want to
request the WfWG pre-configured software, please contact the local
NEC office in your country.
The Windows 95 Restore CD is shipped with the 133 MHz NEC
Versa 4200 systems. If you prefer the Windows for Workgroups
Restore CD, just send the Windows 95 Restore CD to the NEC
Fulfillment Center, and request the Restore CD for Windows for
Workgroups. The Windows for Workgroups Restore CD will be sent
to you.
Battery Gauge
This utility checks the percentage of battery life on your Li-Ion battery.
PowerPanel
PowerPanel lets you view and control a variety of system settings related to
power use and conservation. You access PowerPanel via a toolbar displayed
in either Windows for Workgroups or Windows 95.
See Chapter 3, Using Setup, and the on-line Owner’s Manual for a discus-
sion of PowerPanel. In addition, PowerPanel has an extensive on-line help,
accessible by pressing the PowerPanel menu button, the rightmost button on
the toolbar.
PHDisk
This utility creates a file on the hard disk that is large enough to contain all
the software in memory. Its default size is approximately 17-MB. You will
need to update this utility only if you upgrade the amount of memory to
more than 16-MB in your NEC Versa 4200 (if either the 16 or 32-MB
memory module is installed). This utility must be run in DOS
mode/environment. (It will not run on a compressed drive.) To use this util-
ity, enter the following at the DOS prompt:
PHDisk /create
