3-4 Using Setup
Checking/Setting System Parameters
See the following table for a list of parameters, their factory default settings,
and alternate settings. As you set each parameter, its available settings are
explained in the Item-Specific Help area in the right part of the screen.
When in the Setup utility, reset the parameters on the current page to their
factory default settings by pressing
F9
. Or, reset all parameters by selecting
Set Default Values on the Exit screen.
Setup Parameters
PARAMETER
DEFAULT
SETTING
ALTERNATE
SETTINGS
Main
System Time
System Date
Diskette Drive A
Diskette Drive B
HR:MIN:SEC
MO/DAY/YEAR
1.44MB, 3.5"
Not Installed
1.2MB, 5.25"/Not Installed
1.44MB, 3.5"/1.2MB, 5.25"
Internal Hard Drives
Master
Enabled
Auto
Disabled
BIOS Defined/None/CD/User
Slave
None
BIOS Defined/Auto/CD/User
Docking Station Hard Drives*
Docking Station Master*
Docking Station Slave
Boot Docking Station IDE
System Memory
Extended Memory
Disabled
None
None
No
640K
7168KB
Enabled
BIOS Defined/CD/User/Auto
BIOS Defined/CD/User/Auto
Yes
11264KB (w/4MB card)
15360KB (w/8MB card)
23552KB (w/16MB card)
39936KB (w/32MB card)
12MB card not supported
Peripherals
Serial Port
Infrared Location
Infrared Serial Port
Parallel Port
Parallel Mode
Enabled
Enabled
COM2
LPT1
Bidirectional
Disabled/Reconfigurable
Disabled
Reconfigurable
Disabled/Reconfigurable/LPT2
Unidirectional/Enhanced/ECP
NumLock
Keyboard auto-repeat rate
Keyboard auto-repeat delay
Off
30 per sec
½ sec
On
2/6/10/13/19/22/27 per second
¼, 1 sec, ¾
Security
User Password is
Set Password
Disabled
Press Enter
Enabled
