4-14 Using the Hardware
Clean fingerprints or dust from the disc by wiping it with a soft cloth.
Gently brush the cloth from the center of the disc toward the edge.
!
CAUTION
Avoid using benzene, paint thinner, record cleaner, static repellent,
or any other chemical on the disc. Chemicals and cleaners can
damage the disc.
PC Card Slots (PCMCIA)
Your NEC Versa 4200 notebook integrates two PC Card slots for inserting
two Type II PC Cards or you can also insert one Type III PC Card.
Using the system’s PC Card slots, you can add optional PC Cards and
connect external devices to your NEC Versa 4200. These devices include
peripheral devices, such as modems, LAN cards, and storage cards. For
details on how to obtain these options, see the on-line Options Catalog.
NOTE
If you purchased and/or are using this computer outside the
U.S., please contact the local NEC office or dealer for the options
available in your country.
To insert a PC Card, open the slot cover and follow these steps.
1.
Align the card so that the 68-pin connector points towards the slot.
2.
Slide the card into either slot. A low tone followed by a high tone lets you
know that the card is fully inserted and recognized. (If you turn off the
sound through Setup or PowerPanel, no sound is emitted.)
Other two-tone sequences such as high, then low tones indicate that the
card is inserted, but the card type is unknown.
