NEC UNIVERGE SL2100, Руководство по началу работы

Страница: 59 / 78

SL2100 GETTING STARTED GUIDE
55
2.6.5 Assign a Function Key to each mode
To assign a key to each mode, you need to exit the Programming Mode. The keys are set using the telephone,
not within SL2100 Programming Mode.
Assign keys at the telephone(s) that will change the mode. A phone with an LCD is preferable.

This is not done within the SL2100 Configuration Mode. Keys are changed by dialing a service code using
telephone itself.

You will need a separate key for each mode you are using.

The key for the current mode lights red. To change the mode, press the appropriate key.
2.6.5.1 Default Setting
There are no keys set to day/night modes on any of the telephones.
No. Operation Display Shows;
1 At the telephone that you want to be able to change day/night mode,
press
Speaker key.
2 Dial service code
751
.
3 Press the
Programmable Function Key
you want to set (its current
setting is shown in LCD display). If the key is not defined the function,
go to step 5.
4 If the Function Key is already assigned the function but not used, press
Speaker Key
+
752
+
Function Key
(to be cleared) +
000
+
Speaker
key to clear the current setting and go back to step 1 again to set the
Function Key.
5 Dial
09
followed by the mode number 1 to 8.
1 = Day
2 = Night 1
3 = Mid-Night 1
4 = Rest 1
5 = Day 2
6 = Night 2
7 = Mid-Night 2
8 = Rest 2
☞
If you want to clear the Day/Night Mode key, press 00 after Step 3 to
clear the function.
6 Repeat 3 and 4 to set additional keys/modes.
2.6.6 Configuration sheet: Telephone Ring Assignment
Defaults are shown.
Place the telephones into Ring Groups.
IRG
Number
List of telephones that will ring
PRG 22-04-01
IRG 1
Default=101-108
IRG 2
IRG 3
Key Program
____ 1-20 _ FRI __ 6:51PM ____
101 ______________ DONALD
_ Menu __ Dir __ VM:00 _ CL:00 _
Key Program _______ Key xx
xxxxxxxxxxxxxxx
__
Key Program _______ Key xx
Night Service 0
__