NEC UNIVERGE SL2100, Руководство по началу работы

Страница: 54 / 78

SL2100 GETTING STARTED GUIDE
50
Section 2 Entering the Telephone Programming Mode (Tel Pro)
The installer/system administrator can enter system programming mode from a display
type key telephone. (Up to two users can enter to the mode at the same time)
--Program Mode
System data is identified by a number.
Enter the number using the keypad to select the Program Number.
⇒
In a newly installed system, use extension port No.1.
2.1 How to Enter Programming Mode
The installer/system administrator can enter system programming mode using a display type multiline
telephone. (A maximum of two users can enter mode at the same time.)
1) Press
Speaker
. (Do not lift the handset)
2) Dial # * # *.
3) Dial the system password, then press Hold key to enter Program Mode.
For the programming details, refer to the SL2100 Programming Manual.
2.2 Selecting the Programming Number
Each configuration setting within the SL2100 is identified by a Program Number (e.g., 10-01-01).
1) Ensure the LCD display shows.;
If it is not displayed, press the
Mute
key several times to returns the previous screen.
2) Enter the Program Number (e.g. 10-01-01).
If you dial an incorrect Program Number, you can returns the previous screen by pressing the Mute key.
If you enter incorrect data, you can returns the previous screen without saving the setting by pressing the Mute
key.
2.3 Exiting the Programming Mode
1)
Press Mute key several times to return to the "Program Mode" Screen.
2) Press
Speaker
key to exit.
The system automatically saves the customer data to memory, which is backed up using a lithium battery.
Passward _________________
____ 1-17 _ TUE __ 1:07PM ____
101 ______________ DONALD
_ Menu __ Dir __ VM:00 _ CL:00 _
Passward
@@@@@@@@ ___________
_ ________________________
______ Program Mode _______
_ Base _ Service _ OP1 __ OP2 __
_ ________________________
______ Program Mode _______
_ Base _ Service _ OP1 __ OP2 __
10-01-01 _________________
Year __________ 17 ________
___ ← _______________ → ___
10-01- ________ Sys Config
Time&Date Setup |01
back
↑ ↓
select
_ ________________________
______ Program Mode _______
_ Base _ Service _ OP1 __ OP2 __
_ ________________________
______ Program Mode _______
_ Base _ Service _ OP1 __ OP2 __
____ 1-17 _ TUE __ 1:08PM ____
101 ______________ DONALD
_ Menu __ Dir __ VM:00 _ CL:00 _