manualshive.com logo in svg

NEC SL1100, Руководство по функциям и спецификациям

Поделиться
Скачать
NEC SL1100 Скачать руководство пользователя страница 734

Station Relocation

Description

Station Relocation allows a station to be moved from one location to another, without having to
reprogram the station data. The station features and extension number are the same after it is moved
to the new location.

Conditions

• This feature can be used to swap or relocate multiline and Single Line Terminals.
• The destination extension must be idle. If the station is not idle, busy tone is heard.
• If the Extension Swap service code is dialed from an extension that does not have an extension

swap password programmed, busy tone is heard.

• If the Extension Swap service code is dialed from an extension whose Class of Service does not

allow Extension Data Swap, busy tone is heard.

• If the destination extension entered is not a valid extension, busy tone is heard.
• The following user setting data is relocated with the extension. All other user setting data is either

not relocated or cleared.

- DND
- Call Forwarding
- Memo Dial
- Last Number Dial History
- Saved Number Dial
- Incoming History
- Mute LED Status
- VM MW LED Status

Refer to the Programming section in this feature for system programs that are swapped.

Default Settings

None

System Availability

Terminals

All Multiline Terminals and Single Line Terminals

Required Component(s)

None

Related Features

None

SL1100

ISSUE 2.0

1-722

Station Relocation

S

Содержание SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды