manualshive.com logo in svg

NEC SL1100, Руководство по функциям и спецификациям

Поделиться
Скачать
NEC SL1100 Скачать руководство пользователя страница 120

Call Redirect 

Description

Call Redirect allows a Multiline Terminal user to transfer a call to a pre-defined destination (such as an
operator, voice mail, or another extension) without answering the call. This can be useful if you are on
a call and another rings in to your extension. By pressing the Call Redirect key, the call is transferred,
allowing you to continue with your current call.

This feature works with the following calls:

• Normal trunk call
• DID
• DISA
• DIL
• ICM

The following calls cannot be redirected with the feature:

• ACD (V1.5 or higher)
• Transferred
• Department Group (all ring mode)
• Door Box
• Virtual Extension

Conditions

• After pressing the Call Redirect key, the call does not recall to the extension.
• The predefined destination must be an extension number or voice mail pilot number.
• When a call is Redirected to another phone it does not follow the forwarding on that phone.
• If the call redirect is set to go to an extension that has power cut from Ecology mode the call redirect

key will not operate when pressed.

• Call Redirect is not supported for calls across SL Net.

Default Settings

Enabled

System Availability

Terminals

All Multiline Terminals

Required Component(s)

None

SL1100

ISSUE 2.0

1-108

Call Redirect

C

Содержание SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды