manualshive.com logo in svg

NEC SL1100, Руководство по функциям и спецификациям

Поделиться
Скачать
NEC SL1100 Скачать руководство пользователя страница 629

Operation

When set PRG 15-02-60 : 0 case.

To redial the last number dialed:

For SL1100 Telephones Only:

1.

Press the 

Left Cursor

 key.

REDIAL [#] / ABB is displayed along with the last dialed number.

2.

Press the 

Up Cursor

 key or 

Down Cursor

 key to view the number to dial.

3.

Dial 

#

, press 

Speaker

 key, lift the handset, or press an idle trunk key.

- OR -

For SL1100:
1.

Press the 

List

 softkey

2.

Press the 

Redial

 softkey.

REDIAL -01 is displayed along with the last dialed number.

3.

Press the up and down arrow to view the number to dial.

4.

Dial 

#

 or press 

Speaker

 key or lift the handset or press and idle trunk key.

To scroll through the last 10 outside numbers dialed:

1.

Press the 

Left Cursor

 key. Each time the 

Left Cursor

 key is pressed, it displays the next most

recently dialed number.

2.

When the desired number is displayed, Dial 

#

, press 

Speaker

 key, or lift the handset.

- OR -

1.

Press the 

List

 softkey.

2.

Press the 

Redial

 softkey.

3.

Press the 

Up Cursor

 key or 

Down Cursor

 key to view the number to dial.

4.

Dial 

#

, press 

Speaker

 key, or lift the handset.

To access a System Speed Dial bin:

For SL1100 Telephones Only:

1.

Press the 

Left Cursor

 key.

REDIAL [#] / ABB is displayed along with the last dialed number.

2.

Dial the System Speed Dial bin number.
The number stored in that bin is displayed for your preview.

3.

Dial 

#

, press 

Speaker

 key, lift the handset, or press an idle trunk key.

To view saved name history of outgoing calls:

For SL1100 Telephones Only:

1.

Press the 

Left Cursor

 key.

REDIAL [#] / ABB is displayed along with the last dialed number.

2.

Press the 

Up

 or 

Down Cursor

 key to refresh the list, if the redialed number has a matching

common speed dial bin or extension number associated with it, the name information from PRG
13-04-02 or PRG 15-01-01 is displayed.

3.

Press 

Speaker

 key or lift the handset to dial the number.

The name information will not display after dialing.

ISSUE 2.0

SL1100

Features and Specifications Manual

1-617

R

Содержание SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды