manualshive.com logo in svg

NEC SL1100, Руководство по функциям и спецификациям

Поделиться
Скачать
NEC SL1100 Скачать руководство пользователя страница 67

Automatic Release

Description

Automatic Release drops the line circuit when an outside party abandons the call. For this feature to
work with Loop Start Trunks, the CO/PBX providing the outside line must provide a timed disconnect
signal. Automatic Release is normally provided on Ground start trunks are not supported please
remove, DID and ISDN trunks.

Conditions

• Automatic Release on ISDN trunks is provided by the protocol.
• When an outside line is accessed using a dedicated line key, the LED associated with the line key

goes off when Automatic Release occurs.

• On Loop Start trunks Automatic Release is only available on incoming calls.
• This feature functions while a call is in progress, on hold, or in a conference.
• This feature applies to all ICM type calls in progress, holding or parked.
• When Automatic Release occurs and the telephone is in handsfree mode, 

Speaker

 automatically

turns off. If using the handset, the station is set to idle when the handset goes on-hook.

Default Settings

None

System Availability

Terminals

Not applicable

Required Component(s)

None

Related Features

Central Office Calls, Answering

Central Office Calls, Placing

Guide to Feature Programming

Program Num-

ber

Program Name

Default

14-02-09

Analog Trunk Data Setup - Busy Tone Detection

0

ISSUE 2.0

SL1100

Features and Specifications Manual

1-55

A

Содержание SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды