manualshive.com logo in svg

NEC SL1100, Руководство по функциям и спецификациям

"NEC SL1100" - бизнес-телефонная система с обширными функциями, облегчающая работу администраторов. Для получения руководства администратора можно бесплатно скачать с manualshive.com. Управляйте вашим бизнесом эффективно и легко с помощью этого надежного устройства.

Поделиться
Скачать
background image

Conditions

• The SL Desktop Suite Application does not support Centrex trunks for transferring or call forwarding

off-site.

• The SL Desktop Suite Application does not follow delay ringing. For example, if a virtual extension is

set to delay ring and appears on a Desktop terminal, the Desktop Suite will show the call as ringing
immediately.

• Desktop Applications do not support Secondary Incoming Extensions.
• A maximum of 64 Desktop Applications connections is supported (Desktop Client, or Softphones).

Any 1st-Party CTI over Ethernet connection takes away from the 64 maximum connections.

• The SL Desktop Application does not support Network Address Translation (NAT). Because of this,

any Desktop Application must appear to be on the same network as the system VoIP Interface
(VOIPDB). For remote Desktop Applications, like soft phone, this can be achieved by a VPN
connection to the network the system resides on.

• SL Desktop Suite Application users cannot dial digits while a call is in progress.
• If the SL Desktop Suite user presses the disconnect button to abort a transfer, the call shows up in

Desktop as a held call. The Desktop user is not automatically connected back to the caller.

• With SL Desktop Suite Applications, Intercom calls parked in the Desktop Application do not show

up. Parked trunk calls will show as held calls if the trunk key is programmed on the phone. If the
trunk is not programmed on the phone, parked trunk calls will be removed from Desktop.

• Any station using SL Desktop Suite Applications, in Softphone or deskset mode, must have an ICM

key programmed in 15-07 (

*

00).

• BLF indication for another station is solid green or flashing green if the BLF is for the station the

application is running. There is no difference between busy or ringing for a BLF of another station.

• If DND and CFA are set for another station, its BLF shows red.
• BLF/DSS to be monitored in the SL Desktop Suite Application must be programmed on a physical

key on the phone or DSS console attached to the phone. DSS/ BLF buttons that are programmed
on buttons that do not physically exist on the phone or on a DSS console that is not physically
present do not show up in the Desktop Application.

• Once a SL Desktop Suite is launched on one PC using a User ID and Password in deskset or

Softphone mode, the same User ID and Password cannot be used on a different PC in a different
mode.

• If an IP Multiline phone is controlled by the SL Desktop Suite Application, it cannot be overridden by

another IP multiline phone or Softphone.

• If the SL Desktop Suite is launched for a phone that is on a call, the Desktop will not show the active

call until it is placed on hold.

• When using Multiple Logon, the same Personal ID index can be assigned to a IP Multiline phone/

Softphone, and a CTI Desktop.

• Two ports of the same terminal type (Program 15-05-26) cannot be assigned to the same Personal

ID index (Program 15-05-27).

• Program 10-46-01 must be set to 1 (Auto) or 2 (Manual) for Multiple Logon to work.
• When three ports are assigned the same Personal ID index in Program 15-05-27, if Program

15-05-26 is not set for those ports, the terminal types will be assigned based on order of login. If
Program 15-05-26 is set, the login order does not matter and they will assign the correct port.

• The Override feature functions the same as single login.
• The new Voice Message notification by Windows Toast is only supported in Softphone mode, and

not in Deskset mode.

• Softphone supports only following Audio frame (payload) size for codec type. If different payload

size is set, it would cause a loss of speech path between IP multiline Phone and Softphone.

- For G.711 must be 20ms or 40ms (Program 84-24-01)
- For G.729 must be 20ms or 40ms (Program 84-24-07)
- For G.722 must be 20ms (Program 84-24-32)

SL1100

ISSUE 2.0

1-698

SL Desktop Suite

S

Содержание SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SL1100

GE PACSystems RX7i Reference Manual preview
PACSystems RX7i
Бренд: GE Страницы: 317
Zenith FFH-185A Installation And Operating Manual preview
FFH-185A
Бренд: Zenith Страницы: 14
FAAC MASTER-B Manual preview
MASTER-B
Бренд: FAAC Страницы: 16
Jensen JWM40 Quick Reference Manual preview
JWM40
Бренд: Jensen Страницы: 2
Caliber RMD 052DAB-BT Manual preview
RMD 052DAB-BT
Бренд: Caliber Страницы: 20
Yetter AIR ADJUST 2940 Operator'S Manual preview
AIR ADJUST 2940
Бренд: Yetter Страницы: 64
Bigben MCD11 Operating Instructions Manual preview
MCD11
Бренд: Bigben Страницы: 64
Barco CX-50 Gen2 Installation Manual preview
CX-50 Gen2
Бренд: Barco Страницы: 144
Magnetic Autocontrol MAGSTOP MIB 10-C090 Operating Instructions Manual preview
MAGSTOP MIB 10-C090
Бренд: Magnetic Autocontrol Страницы: 15
Juniper JCS 1200 Replacing Instructions preview
JCS 1200
Бренд: Juniper Страницы: 2
Advanced Native Technologies iROLLER 10 User Manual preview
iROLLER 10
Бренд: Advanced Native Technologies Страницы: 29
LG FB163-A Manual preview
FB163-A
Бренд: LG Страницы: 24
LG LM-V1060 Owner'S Manual preview
LM-V1060
Бренд: LG Страницы: 23
LG FA163 Quick Manual preview
FA163
Бренд: LG Страницы: 12
LG FA166DAB Owner'S Manual preview
FA166DAB
Бренд: LG Страницы: 26
LG FA64 (FA64-D0U/ FAS64F) Owner'S Manual preview
FA64 (FA64-D0U/ FAS64F)
Бренд: LG Страницы: 12
LG FE-515E Owner'S Manual preview
FE-515E
Бренд: LG Страницы: 19
LG FFH-185A Service Manual preview
FFH-185A
Бренд: LG Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды