NEC SL1100, Руководство по функциям и спецификациям

Страница: 704 / 864

Program Num-
ber
Program Name Default
16-01-02 Department Group Calling Cycle
This program is used to define what happens when the depart-
ment group pilot number is called.
If this is set to
priority , every new call to the pilot number will
search an idle phone in order of the extensions priority (set in
PRG 16-02-02). The lower the number the higher the priority
for that extension. For example, if two phones are idle and one
phone has a priority of a 1 and the other phone has a priority
of a 2, the phone with the priority 1 will receive the call.
If this is set to
circular , every new call to the pilot number will
cycle to an idle extension in a circular order. The priority of the
extension is not used.
When using a department group for Voice Mail, this program
must be set to (
0 ) priority.
0 = Normal Routing (Priority)
1 = Easy UCD routing (Circular)
(default)
0
16-01-04 Department Group Hunting Mode
This program sets what happens when an unanswered call to
a department group pilot number reaches the last member of
the group.
If this is set to (
0 ), once the last extension is called the hunting
will stop.
If this is set to (
1 ), once the last extension is called the hunting
will continue to look for an idle member to receive the call.
NEC recommends setting this to (
1 ) Circular when using a de-
partment group for Voice Mail.
0 = Last extension is called and hunt-
ing stops
1 = Circular (Hunting will continue)
(default)
0
16-01-10 Department Group Enhanced Hunting
This program defines the conditions by which calls to the pilot
number will hunt to the available extensions in the group.
For a description on all the hunting types, see the Department
Group feature.
NEC recommends setting the Voice Mail department group as
(
3 ) Busy/No Answer.
0 = No Hunting
1 = Hunting when Busy
2 = Hunting when Not Answered
3 = Hunting when Busy/No Answer
(default)
0
16-02-01
*1
Department Group Assignment for Extensions
This program is used to assign the extensions to the depart-
ment group.
When using a department group for Voice Mail, you must have
licenses to cover every extension assigned.
1 ~ 32
(default)
1
16-02-02 Department Group Priority Assignment
This program sets the extensions priority within the department
group. The lower the number that is assigned the higher the
priority.
When using a department group for Voice Mail, the lowest
voice mail port must have the lowest priority number in the
group.
For example if the VM had system ports 65 ~ 68 and used ex-
tensions 165 ~ 168 the following would be the assignment.
Ext 165 = Priority 1
Ext 166 = Priority 2
Ext 167 = Priority 3
Ext 168 = Priority 4
1 ~ 999
Refer to Programming Manual.
Refer to Programming Manual.
45-01-01 Voice Mail Department Group Number
When using Centralized Voice Mail in an SL Net network, this
program MUST be left unassigned in all sites that will access
the VM.
0 = No Voice Mail Assigned
1 ~ 32 = Department Group 1 ~ 32
(default)
0
45-01-07
*1 Centralized Voice mail Pilot No.
All sites using the Centralized Voice Mail must assign the pilot
number that is assigned in PRG 11-07-01.
Maximum of 8 digits (0 ~ 9, * , #,)
(default)
not assigned
45-01-08
*1 Centralized Voice Mail Department Group Number
Assign the department group number from PRG 11-07-01.
This program is only assigned in the system that has the Voice
Mail.
0 = No Voice Mail Assigned
1 ~ 32 = Department Group 1 ~ 32
(default)
0
45-01-10
*1 New NSL Protocol support
All sites using the Centralized Voice Mail must enable this pro-
gram for proper integration.
0 = Off (Disable)
1 = On (Enable)
(default)
0
SL1100 ISSUE 2.0
1-692 SL Net
S