NEC SL1100, Руководство по функциям и спецификациям

Страница: 378 / 864

Program
Number
Program Name/Description Assigned Data
16-01-01 Department Group Name
This program is used to assign a name to the department group.
Maximum of 12 Characters
(default = Not Assigned)
16-01-02 Department Group Calling Cycle
This program is used to define what happens when the department
group pilot number is called.
If this is set to
priority every new call to the pilot number will search
an idle phone in order of the extensions priority (set in PRG 16-02-02).
The lower the number the higher the priority for that extension. For ex-
ample if two phones are idle and one phone has a priority of a 1 and
the other phone has a priority of a 2 the phone with the priority 1 will
receive the call.
If this is set to
circular every new call to the pilot number will cycle to
an idle extension in a circular order. The priority of the extension is not
used.
When using a department group for Voice Mail this program must be
set to (
0 ) priority.
0 = Normal Routing (Priority)
1 = Easy UCD routing (Circular)
(default = 0)
16-01-04 Department Group Hunting Mode
This program sets what happens when an unanswered call to a de-
partment group pilot number reaches the last member of the group.
If this is set to (
0 ) once the last extension is called the hunting will
stop.
If this is set to (
1 ) once the last extension is called the hunting will con-
tinue to look for an idle member to receive the call.
It is recommended when using a department group for Voice Mail to
set this to a (
1 ), circular.
0 = Last extension is called and
hunting stops
1 = Circular
(Hunting will continue.)
(default = 0)
16-01-10 Department Group Enhanced Hunting
This program sets the conditions on which calls to the pilot number
will hunt to the available extensions in the group.
For a description on all the hunting types see the section in this fea-
ture labeled "Enhanced Hunting".
It is recommended to set the Voice Mail department group as (
3 )
Busy/No Answer.
0 = No Hunting
1 = Hunting when Busy
2 = Hunting when Not Answered
3 = Hunting when Busy/No Answer
(default = 0)
16-02-01 * Department Group Assignment for Extensions
This program is where to assign the extensions to the department
group.
When using a department group for Voice Mail do not assign more ex-
tensions in the group than the system is licensed for.
1 ~ 32
(default = 1)
16-02-02 Department Group Priority Assignment
This program sets the extensions priority within the department group.
The lower the number that is assigned the higher the priority is.
When using a department group for Voice Mail the lowest voice mail
port must have the lowest priority number in the group.
For example if the VM had system ports 65~68 and used extensions
165~168 the following would be the assignment.
Ext 165 = Priority 1
Ext 166 = Priority 2
Ext 167 = Priority 3
Ext 168 = Priority 4
1 ~ 999
(Refer to the programming manual for
the default values of all extensions.)
45-01-01 * Voice Mail Department Group Number
Assign the department group number, from PRG 11-07-01, that is to
be used for Voice Mail.
It is recommended to not use department group 01 because by de-
fault all extensions are assigned to this group.
0 = No Voice Mail Assigned
1 ~ 32 = Department Group 1 ~ 32
(default =0)
14-01-22 Caller ID to Voice Mail
This command enables or disables the ability for the system to send
the caller ID information to the Voice Mail.
This command is for ALL trunk types (analog, digital, and IP).
0 = Disable (Caller ID not sent to
VM.)
1 = Enable ( Caller ID is sent to VM.)
(default = 0)
15-02-37 Voice Mail Message Wait Lamp Color
Per extension, assign if the Voice Mail Message waiting light is Red or
Green.
0 = Green
1 = Red
(default = 1)
ACD Delay Announcement: (V1.5 or higher)
Only use if Master Mailboxes are used for ACD Delay Announcements.
SL1100 ISSUE 2.0
1-366 InMail
I