Configuration Procedures
5-17
A confirmation dialog box appears.
4. Click
OK
.
If you want to return to the Alert Management page without changing the IP address,
click
Cancel
on the SMTP server address page.
Configuring Alert Notifications using Remote console interface
You can configure up to 13 destinations for alert notifications using the following
procedure:
1. Navigate to the alert management page on the partition remote console interface,
as shown in
Figure 5-9
.
Figure 5-9 Alert Management Page
2. Make one of the following selections:
y
Select an existing alert destination that you want to modify or to send a test
alert to check its validity.
y
Select a blank entry (the destination address is zeros) to define a new alert
destination.
3. Click Modify to modify an alert definition or define a new alert destination as an
e-mail or SNMP trap alert type.
Содержание NECCare Platinum Express5800/A1160
Страница 1: ...EXPRESS5800 A1160 Service Processor Troubleshooting Guide...
Страница 10: ......
Страница 52: ...456 01807 000...