Restoring Service Processor to Default Settings
4-3
4.2.2.
Restoring the Default Settings
1. Ensure that the partition is DC powered down.
2. Record the partition network settings:
a. On the main menu on the EXPRESSSCOPE® Monitor LCD, use the navigation
buttons to select
Partition
, and then press
OK
.
b. On the partition menu, use the navigation buttons to select
Network
, and then
press
OK
.
c. On the partition network menu, use the navigation buttons to select
View
Settings
, and then press
OK
.
d. Write down the settings for later use.
3. Record the cell network settings:
a. On the main menu on the EXPRESSSCOPE® Monitor LCD, use the navigation
buttons to select
Cell
, and then press
OK
.
b. On the cell menu, use the navigation buttons to select
Network
, and then press
OK
.
c. On the cell network menu, use the navigation buttons to select
View Settings
,
and then press
OK
.
d. Write down the settings for later use.
4. On the cell menu, use the navigation buttons to select
Restore Defaults
, and then
press
OK
.
5. Confirm that you want to restore your Service Processor to default settings.
4.2.3. Configuring
After
Restoring
After restoring your Service Processor to default settings, reconfigure your Service
Processor before troubleshooting or restoring another Service Processor. See
5.2
Configuring After Restoring Default Settings
for reconfiguration procedures.
Содержание NECCare Platinum Express5800/A1160
Страница 1: ...EXPRESS5800 A1160 Service Processor Troubleshooting Guide...
Страница 10: ......
Страница 52: ...456 01807 000...