Accessing the Service Processor
1-3
1.2.2.
Recording Partition Configuration
You might lose your partition configuration while troubleshooting your Service Processor,
especially if you restore the Service Processor in a single-cell partition. If possible, log
on to the remote console interface for your partition (see
1.3.1 Logging On to Partition
Remote Console Interface
) and use the save or print function of your browser to archive
a copy of the remote console page so that you have a record of your current partition
configuration and settings, such as power restore policy and fault behavior. Use this
information later to verify your partition configuration or reconfigure the partition.
1.2.3. Workstation
Requirements
To access your Service Processor through the partition remote console interface,
ensure that your workstation is on the same LAN segment as your system or that your
partition IP address is routable. If a partition or cell in your system does not use a
routable IP address, it is not accessible to network entities beyond its LAN segment (that
is, network routers do not forward traffic to or from the partition or cell).
Note: IP addresses in the following ranges are not routable:
y
10.0.0.0 to 10.255.255.255
y
172.16.0.0 to 172.31.255.255
y
192.168.0.0 to 192.168.255.255
1.3. Accessing the Service Processor
Procedures in this guide might require you to access your Service Processors. You can
access each Service Processor remotely through the partition remote console interface
or through the EXPRESSSCOPE® Monitor interface on the front of each cell.
1.3.1.
Logging On to Partition Remote Console Interface
To access the partition remote console interface
1. Type the maintenance LAN (MLAN) address of the partition in the browser address
box.
Note: The MLAN address is the IP address on the partition and cell menus on the
EXPRESSSCOPE® Monitor interface.
A log-on dialog box appears.
2. Type a valid user name and password, and click Log On.
Management firmware authenticates the credentials before displaying the
requested remote console interface.
Содержание NECCare Platinum Express5800/A1160
Страница 1: ...EXPRESS5800 A1160 Service Processor Troubleshooting Guide...
Страница 10: ......
Страница 52: ...456 01807 000...