Error Messages Displayed on EXPRESSSCOPE® Monitor LCD
3-8
3.4.3.
Message: “Segment Conflict”
This message indicates that IP addresses for your partition and cell are not on the same
segment.
Your system requires that the IP address for the partition be on the same segment as
the IP address for the cell.
The segment is defined by the subnet mask, which consists of the group of addresses
with identical bits set in the portions of the IP address corresponding to the 1s in the
mask. For example, if the subnet mask is 255.255.255.0, then all the IP addresses with
the first three of the four octets identical are in the same segment. This means that
192.64.12.0 through 192.64.12.255 are in the same segment, and 192.64.13.0 through
192.64.13.255 are in another segment.
Solution
: Using the EXPRESSSCOPE® Monitor interface of the cell for the Service
Processor you are troubleshooting, perform the following troubleshooting steps:
1. Record the partition subnet mask and IP address:
a. On the main menu on the EXPRESSSCOPE® Monitor LCD, use the navigation
buttons to select
Partition
, and then press
OK
.
b. On the partition menu, use the navigation buttons to select
Network
, and then
press
OK
.
c. On the partition network menu, use the navigation buttons to select
View
Settings
, and then press
OK
.
d. Write down the subnet mask and IP address.
2. Record the cell subnet mask and IP address:
a. On the main menu on the EXPRESSSCOPE® Monitor LCD, use the navigation
buttons to select
Cell
, and then press
OK
.
b. On the cell menu, use the navigation buttons to select
Network
, and then press
OK
.
c. On the cell network menu, use the navigation buttons to select
View Settings
,
and then press
OK
.
d. Write down the subnet mask and IP address.
3. Verify that the subnet masks of the partition and cell are identical, and the same as
the subnet mask of all entities on the operations LAN.
Update your network settings as needed. (Refer to
5.3.1 Configuring Network
Settings
or the
User’s Guide
.)
4. Verify that the IP addresses are in the same segment.
Update your network settings as needed. (Refer to
5.3.1 Configuring Network
Settings
or the
User’s Guide
.)
Содержание NECCare Platinum Express5800/A1160
Страница 1: ...EXPRESS5800 A1160 Service Processor Troubleshooting Guide...
Страница 10: ......
Страница 52: ...456 01807 000...