manualshive.com logo in svg

NEC mPD178053, Руководство пользователя

"NEC mPD178053" - микроконтроллер с пользовательским руководством. Вы можете скачать бесплатное руководство по эксплуатации на {веб-сайте}. Получите подробную информацию о продукте, чтобы легко использовать и программировать ваш микроконтроллер. Идеально подходит для профессионалов и любителей в электронике.

Поделиться
Скачать
background image

4

User’s Manual  U15104EJ2V0UD

License not needed:

µ

PD178F054GC-8BT

The customer must judge the need for license:

µ

PD178053GC-

×××

-8BT, 178054GC-

×××

-8BT

The export of these products from Japan is regulated by the Japanese government.  The export of some or all of these
products may be prohibited without governmental license.  To export or re-export some or all of these products from a
country other than Japan may also be prohibited without a license from that country.  Please call an NEC sales
representative.

M8E  00. 4

The information in this document is current as of October, 2001. The information is subject to 
change without notice.  For actual design-in, refer to the latest publications of NEC’s data sheets or 
data books, etc., for the most up-to-date specifications of NEC semiconductor products.  Not all 
products and/or types are available in every country.  Please check with an NEC sales representative 
for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior    
written consent of NEC.  NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property  rights of 
third parties by or arising from the use of NEC semiconductor products listed in this document or any other 
liability arising from the use of such products.  No license, express, implied or otherwise, is granted under any 
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative 
purposes in semiconductor product operation and application examples. The incorporation of these 
circuits,  software and information in the design of customer’s equipment shall be done under the full 
responsibility of customer.  NEC assumes no responsibility for any losses incurred by customers or third 
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers 
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely.  To minimize 
risks of damage to property or injury (including death) to persons arising from defects in NEC 
semiconductor products, customers must incorporate sufficient safety measures in their design, such as 
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific".  The "Specific" quality grade applies only to semiconductor products 
developed based on a customer-designated "quality assurance program" for a specific application.  The 
recommended applications of a semiconductor product depend on its quality grade, as indicated below.  
Customers must check the quality grade of each semiconductor product before using it in a particular 
application.
 "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots

"Special":

Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)

"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.

The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC’s 
data sheets or data books, etc.  If customers wish to use NEC semiconductor products in applications not 
intended by NEC, they must contact an NEC sales representative in advance to determine NEC’s willingness 
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for

NEC (as defined above).

•

•

•

•

•

•

Содержание mPD178053
















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для mPD178053

Camozzi PRE Series Operation And Maintenance Instructions preview
PRE Series
Бренд: Camozzi Страницы: 33
Camozzi PME Series Operation & Maintenance Instructions Manual preview
PME Series
Бренд: Camozzi Страницы: 64
Gamma Vacuum SPCe User Manual preview
SPCe
Бренд: Gamma Vacuum Страницы: 25
Gamma DIGITEL MPCq User Manual preview
DIGITEL MPCq
Бренд: Gamma Страницы: 28
Vacon 100X series Installation, Technical And Maintenance Manual preview
100X series
Бренд: Vacon Страницы: 132
Zamel Extra Free RZB-02 Quick Manual preview
Extra Free RZB-02
Бренд: Zamel Страницы: 2
Netafim AlphaDisc BLE Quick Manual preview
AlphaDisc BLE
Бренд: Netafim Страницы: 4
TREND IQ422 Installation Instructions Manual preview
IQ422
Бренд: TREND Страницы: 12
GJD DYGIZONE GJD910 Manual preview
DYGIZONE GJD910
Бренд: GJD Страницы: 13
Jebao AQLink A1 Quick Start Manual preview
AQLink A1
Бренд: Jebao Страницы: 4
Cypress AN77960 Manual preview
AN77960
Бренд: Cypress Страницы: 13
Omron EJ1N-TC2 Operation Manual preview
EJ1N-TC2
Бренд: Omron Страницы: 25
Kemper 689 04 011 Service Manual preview
689 04 011
Бренд: Kemper Страницы: 16
Seiko Epson S5U1C17W23T Manual preview
S5U1C17W23T
Бренд: Seiko Epson Страницы: 21
jablotron GD-06 ALLEGRO Manual preview
GD-06 ALLEGRO
Бренд: jablotron Страницы: 2
Danfoss PVE 7 Series Technical Information preview
PVE 7 Series
Бренд: Danfoss Страницы: 44
Panlux PN78000623 Instructions Manual preview
PN78000623
Бренд: Panlux Страницы: 7
CHINT JKF8 Series User Instructions preview
JKF8 Series
Бренд: CHINT Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды