NEC EXPRESS5800/120Lf, Руководство пользователя

Страница: 163 / 198

Problem Solving 5-17
Table 5-3. POST Error Codes and Messages (continued)
Error Code and Message Description Action
0B7C The error occurred
during the redundant
power module
confirmation. An error occurred while redundant
power supply was configured. Contact your service representative to
replace the power unit.
0B7D The normal
operation can not be
guaranteed with use
of only one PSU. System is running on only one
power supply. Contact your service representative to
replace the power unit.
0B80 BMC Memory Test
Failed. BMC SRAM test error
0B81 BMC Firmware Code
Area CRC check
failed. CRC error occurred in BMC code
area.
0B82 BMC Core Hardware
Failure. Hardware failure occurred in BMC.
0B83 BMC 1BF or 0BF
check failed.
0B8A BMC SEL area full
0B8B BMC progress check
timeout.
0B8C BMC command
access failed.
0B8D Could not redirect
the console-BMC
busy.
0B8E Could not redirect
the console-BMC
error.
0B8F Could not redirect
the console-BMC
parity error.
Possible BMC errors.
0B90 BMC Platform
Information Area
Corrupted. The platform information area of
BMC is damaged.
0B91 BMC update
firmware corrupted. Possible BMC errors.
Shutdown and restart the server. If the
error cannot be corrected, contact your
service representative.
0B92 Internal use area of
BMC FRU corrupted. Possible BMC errors.
All the commands and functions other
than the FRU command and the EMP
function can be used. This is not a fatal
error. Turn off the power once and
then on again to restart the server. If the
error cannot be corrected, contact your
service representative.
0B93 BMC SDR
Repository empty. No BMC SDR data exists.
Turn off the power once and
then on again to restart the server. If the
error cannot be corrected, contact your
service representative.