NEC EXPRESS5800/120Lf, Руководство пользователя

Страница: 103 / 198

Upgrading Your System 4-17
12.
Position the heat sink on the processor so that the L-channel groove on its
bottom face fits the lever and plastic end of the socket. See Figure 4-14.
A
B
C
D
A – L-Channel groove
B –Processor
C – Plastic
D – Lever
Figure 4-14. Installing the Processor Heat Sink
13.
Tip the heat sink so that the hole on the clip away from the fan connector fits
over the tab on the base of the socket (1). Then insert a small screwdriver
into the slot on the wire clip bracket, and hook the bracket over the other tab
on the base of the socket, while pressing down on the bracket (2). See Figure
4-15.
!
CAUTION
Ensure that the heat sink is positioned properly on top of the
processor so that it is level and not slanted. If for any reason
it is out of position, removed the heat sink and reinstall it.
1
2
Figure 4-15. Securing the Processor Heatsink