manualshive.com logo in svg

NEC 78K0S/KU1+, Руководство пользователя

Продукт NEC 78K0S/KU1+ поставляется с бесплатным пользовательским руководством, которое можно загрузить с {вебсайт}. Руководство поможет вам лучше использовать продукт и раскрыть его потенциал. Не упустите возможность скачать его прямо сейчас!

Поделиться
Скачать
background image

APPENDIX  D   LIST  OF  CAUTIONS 

User’s Manual  U18172EJ2V0UD 

314 

(7/15) 

Chapter 

Cl

assi

fi

cati

on 

Function Details 

of 

Function 

Cautions Page 

Set bits 7, 6, and 5 to 0, 1, and 1, respectively

.  

Do not set the other values. 

p. 140

After reset is released, WDTM can be written only once by an 8-bit memory 
manipulation instruction.  If writing is attempted a second time, an internal reset 
signal is generated.  However, at the first write, if “1” and “x” are set for WDCS4 
and WDCS3 respectively and the watchdog timer is stopped, then the internal 
reset signal does not occur even if the following are executed. 

 

•

 Second write to WDTM 

 

•

 1-bit memory manipulation instruction to WDTE 

 

•

 Writing of a value other than “ACH” to WDTE 

p. 141

WDTM cannot be set by a 1-bit memory manipulation instruction. 

p. 141

WDTM: 
Watchdog timer 
mode register 

When using the flash memory programming by self programming, set the overflow 
time for the watchdog timer so that enough overflow time is secured (Example  1-
byte writing: 200 

µ

s MIN., 1-block deletion: 10 ms MIN.). 

p. 141

If a value other than ACH is written to WDTE, an internal reset signal is 
generated. 

p. 141

If a 1-bit memory manipulation instruction is executed for WDTE, an internal reset 
signal is generated. 

p. 141

Soft 

WDTE: 
Watchdog timer 
enable register 

The value read from WDTE is 9AH (this differs from the written value (ACH)). 

p. 141

When “low-
speed internal 
oscillator cannot 
be stopped” is 
selected by 
option byte 

In this mode, operation of the watchdog timer cannot be stopped even during 
STOP instruction execution.  For 8-bit timer H1 (TMH1), a division of the low-
speed internal oscillation clock can be selected as the count source, so clear the 
watchdog timer using the interrupt request of TMH1 before the watchdog timer 
overflows after STOP instruction execution.  If this processing is not performed, 
an internal reset signal is generated when the watchdog timer overflows after 
STOP instruction execution. 

p. 142

Chapter 8

 

Hard 

Watchdog 
timer 

when “low-
speed internal 
oscillator can be 
stopped by 
software” is 
selected by 
option byte 

In this mode, watchdog timer operation is stopped during HALT/STOP instruction 
execution.  After HALT/STOP mode is released, counting is started again using 
the operation clock of the watchdog timer set before HALT/STOP instruction 
execution by WDTM.  At this time, the counter is not cleared to 0 but holds its 
value. 

p. 144

Soft 

Sampling time 
and A/D 
conversion time 

The above sampling time and conversion time do not include the clock frequency 
error.  Select the sampling time and conversion time such that Notes 2 and 3 
above are satisfied, while taking the clock frequency error into consideration (an 
error margin maximum of 

±

5% when using the high-speed internal oscillator). 

p. 149

In the 78K0S/KU1+, V

SS

 functions alternately as the ground potential of the A/D 

converter.  Be sure to connect V

SS

 to a stabilized GND (= 0 V). 

p. 150

Hard 

Block Diagram 

In the 78K0S/KU1+, V

DD

 functions alternately as the A/D converter reference 

voltage input.  When using the A/D converter, stabilize V

DD

 at the supply voltage 

used (2.7 to 5.5 V). 

p. 150

The above sampling time and conversion time do not include the clock frequency 
error.  Select the sampling time and conversion time such that Notes 3 and 4 
above are satisfied, while taking the clock frequency error into consideration (an 
error margin maximum of 

±

5% when using the high-speed internal oscillator). 

p. 154

If a bit other than ADCS of ADM is manipulated while A/D conversion is stopped 
(ADCS = 0) and then A/D conversion is started, execute two NOP instructions or 
an instruction equivalent to two machine cycles, and set ADCS to 1. 

p. 154

A/D conversion must be stopped (ADCS = 0) before rewriting bits FR0 to FR2. 

p. 154

Chapter 9 

Soft 

A/D 
converter 

ADM: A/D 
converter mode 
register 

Be sure to clear bits 6, 2, and 1 to 0. 

p. 154

Содержание 78K0S/KU1+





































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 78K0S/KU1+

MADRIX AURA Technical Manual & Quick Start Manual preview
AURA
Бренд: MADRIX Страницы: 36
Canarm MC Series Installation Manual preview
MC Series
Бренд: Canarm Страницы: 3
Salda TPC User Manual preview
TPC
Бренд: Salda Страницы: 16
Harpo BraillePen 12 Quick Start Manual preview
BraillePen 12
Бренд: Harpo Страницы: 35
Hardi HC 6500 Quick Manual preview
HC 6500
Бренд: Hardi Страницы: 2
IFM Electronic ecomat 100 R 360 Operating Instructions Manual preview
ecomat 100 R 360
Бренд: IFM Electronic Страницы: 16
IFM Electronic AC1331 Installation Instructions Manual preview
AC1331
Бренд: IFM Electronic Страницы: 23
Sullair 02250160-842 Instruction Manual preview
02250160-842
Бренд: Sullair Страницы: 31
Nuvoton NuMicro M252 Series User Manual preview
NuMicro M252 Series
Бренд: Nuvoton Страницы: 38
Danfoss VLTAutomationDrive FC 360 Quick Manual preview
VLTAutomationDrive FC 360
Бренд: Danfoss Страницы: 52
Partlow MIC 1161 Operator'S Manual preview
MIC 1161
Бренд: Partlow Страницы: 49
Ascon tecnologic TLB 55 Operating Instruction preview
TLB 55
Бренд: Ascon tecnologic Страницы: 11
ROBOT3T THC3T-02 Operation Manual preview
THC3T-02
Бренд: ROBOT3T Страницы: 21
StudioComm Dante 792 User Manual preview
Dante 792
Бренд: StudioComm Страницы: 61
Unimig UNI-FLAME REG Operation Manual preview
UNI-FLAME REG
Бренд: Unimig Страницы: 4
Continental Instruments CICP1800T Datasheet preview
CICP1800T
Бренд: Continental Instruments Страницы: 2
LS Industrial Systems GLOFA G7M-DR20U User Manual preview
GLOFA G7M-DR20U
Бренд: LS Industrial Systems Страницы: 367
Leader F1620 Manual preview
F1620
Бренд: Leader Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды