NCR EasyPoint 7401, Руководство пользователя по оборудованию

Страница: 250 / 280

6-30 Chapter 6: Operating System Recovery
10. The directory that Ghost is now looking in should be Z: (if not,
switch to Z). Select the
File name to load image from
file
(nnnnnnn.gho) and press Enter .
11. Select the Local destination drive and press Enter .
12. Set the sizes of the primary and secondary partitions as follows.
O/S Primary Partition/ Format Secondary Partition Size
DOS 2 GB/FAT16 2 GB/FAT16
Win95 2 GB/FAT16 Fill remainder as FAT 32
WinNT 2 GB/FAT16 Fill remainder as NTFS
Win98 Single FAT 32 partition N/A
Win2000 Single FAT 32 partition N/A
WinXPe Single NTFS partition N/A
Note: In order to do this you may need to clear the amount from
the second partition.
13. Press Enter .
14. If you are recovering from Win9x, it is likely that the second
partition will be too small for FAT32. If so, a dialog is displayed
Converting partition from FAT32 to FAT, proceed?
Choose Yes .
15. At the next dialog box,
Proceed with disk load? Destination drive will be
permanently overwritten,
Choose
Yes
to start the recovery process.