46
Machine run time in hours since last cleared
(used for maintenance)
Display the machine run time since last cleared. The console will display “MAINT HOURS #####”. This will
provide the number of hours between service or maintenance calls. The machine run time is reset to zero in
the following Diagnostics section.
3. To exit “MACHINE STATUS”, press the [CLEAR] key.
Diagnostic Codes
Diagnostic codes are used to test various components of the machine such as the display, keyboard, serial port,
alternator, and tachometer, as well as viewing the error log information and resetting the time between service or
maintenance calls. To run diagnostics and view diagnostic information:
1. Press [Level: UP], [6], [ENTER]. The console will display “DIAGNOSTICS”
2. Press [Level: UP] or [Level: DOWN] to scan through the choices. Select the option you want to view by
pressing [ENTER].
The diagnostic options are as follows:
Test display
To test the LCD display, press [ENTER] when the message, “DISPLAY TEST” is displayed. The console
screen alternates turning on all LCD segments and a representative program screen. Verify that all LCD
segments turn on.
Test keyboard
To test all the keys on the keyboard, press [ENTER] when the message, “KEY TEST” is displayed. Then, press
any key on the keyboard and that key’s name will be displayed in the text line. Press [CLEAR] as the last key
to exit this test.
Test serial port
To test the serial port, press [ENTER] when the message, “SERIAL TESTS” is displayed. This test performs a
serial loop back test. Select the CSAFE RS-232 selection. You will need a loop-back test cable inserted into
the appropriate connector port to successfully run this test. (To order a test cable, contact your Nautilus
Service Representative.) Console will display either “PASS” or “FAIL”.
Test alternator
To test the machine’s alternator, press [ENTER] when the message, “ALT TEST” is displayed. This test
verifies the alternator field routines through the console. Position yourself on the machine and press and hold
[Level: UP] for “field on”. After exercising briefly you should build up resistance. For “field off”, press [Level:
DWN].
CONSOLE CODES
