48
MAINTENANCE INSTRUCTIONS
Configuration Codes
To change the machine type from Stepper, StepMill
®
, Elliptical or U/R916, press [LEVEL: UP], [8], [ENTER]. The
display will read “CHANGE MACHINE”. Press (ENTER) to display the list of machines, then press [Level: UP] or
[Level: DOWN] to scan through the choices. Select the machine type you want by pressing [ENTER].
Maintenance Records
For ease of maintenance the U916 and R916 console will keep track of hours, number of workouts, time between
last servicing, etc. You can quickly access any of the custom menus by pressing [LEVEL: UP], [4], [ENTER]. The
console will then display “MACHINE STATUS.” Use the [Level: UP] and [Level: DOWN] keys to scroll through the
options. For details, refer to the Machine Status Console Codes in the previous section.
Resetting the Maintenance Hour Timer
After each maintenance period reset the counter. Press [LEVEL: UP], [7], [ENTER]. Then use the Level keys to
scroll through the options. When “MAINT HOURS” is displayed, press [ENTER]. Press the [0] key, then press
[ENTER]. Press [CLEAR] to return to the opening screen.
Initial Service
Upon receiving your machine, use a soft, clean towel to wipe off the dust, which may have accumulated during
shipping. Your new machine will require minor assembly. Refer to the “Installation Instructions” section for
details.
Cleaning
1. DO NOT USE GLASS CLEANERS OR ANY OTHER HOUSEHOLD CLEANERS ON THE CONSOLE. Clean the
console daily with a water-dampened cloth and wipe dry after cleaning.
2. Clean the exterior of the machine daily using soap and water or a diluted, non-mineral based household
cleaner such as Fantastic®.
Inspection
1.
Frame:
Inspect the frame for any rust, bubbling, or paint chips during the weekly cleaning. The salt in
perspiration can damage the unpainted surfaces. Repair the damaged area with a touch-up paint kit
purchased from Nautilus (call Customer Service for order information).
