43
Nautilus® Commercial Series Bike Owner’s Manual
CONSOLE CODES
There are 4 groups of console codes as follows: Customization (codes starting with 2 or 3), Machine Status
(codes starting with 4), Diagnostic (codes starting with 6 or 7), and Configuration (codes starting with 8). Each
group of codes is defined below. To access these console codes and the options within each group, follow the
instructions for each section.
Customizing the U916 and R916
You can customize several parameters on the U916 and R916 to conform to your individual requirements, including
changing the workout default values and setting custom parameters such as time limits, changing screen
contrast, changing language, and changing units.
To change the workout default values:
1. Press [Level: UP], [2], [ENTER]. The console will display “DEFAULTS”.
2. Press [Level: UP] or [Level: DOWN] to scan through the default choices. Select the option you want to
change by pressing [ENTER]. Then use the [Level: UP] or [Level: DOWN] keys or the numerical keypad to
change the value for the selected option. Press [ENTER] to accept the choice for that option.
The Defaults options are as follows:
Change default weight
Use the numeric keypad or [Level: UP] or [Level: DOWN] keys to change the desired default weight for your
facility. Press [ENTER] to accept the new value.
Change default workout time
Use the numeric keypad or [Level: UP] or [Level: DOWN] keys to change the desired default workout time
between 10 and 99 minutes. Press [ENTER] to accept the new value.
Change default age
Use the numeric keypad or [Level: UP] or [Level: DOWN] keys to change the desired default age used to
calculate target heart rate. Valid age range is between 10 and 99. Press [ENTER] to accept the new value.
Change default % Target HR
Use the numeric keypad or [Level: UP] or [Level: DOWN] keys to change the desired target HR % value based
on maximum HR. This is used to calculate the target heart rate value based on the % of maximum HR. Valid
target HR % is between 40 and 90%. Press [ENTER] to accept the new value.
CONSOLE CODES
