natus OLYMPIC CFM 6000, Руководство оператора

Страница: 36 / 42

30 OLYMPIC CFM 6000 Operator’s Manual
„
CALIBRATE . This option recalibrates the touch screen.
„
CANCEL . This option cancels the software update process. You need to restart
the CFM 6000 by turning it off and back on.
Disposing of Product
The CFM 6000 and the CFM cart do not have any components that require special disposal
precautions, except as stated for electrodes. Thus, product disposal should be handled
according to national laws and regulations.
The fluorescent lamp in the LCD display contains a small amount of Mercury. Follow
local ordinances and regulations for disposal.
Assembling the CFM Cart
Required items:
„
Cart base with foot pedal, screws, and Allen wrenches (5/32 in. and 3/16 in.)
„
Cart post with handle and drawer assembly
To assemble the CFM cart:
1
Remove the cart components from the shipping boxes.
2
Place the cart post upside-down, with the drawer resting on the floor.
3
Place the cart base, wheels facing up, onto the post. Align the key on the base with
the key slot on the stand (see Figure 12).
Figure 12 Placing the cart base onto the post
4
Place the foot pedal on the handle-side of the base. Ensure that the foot pedal label
is facing the drawer, and then use the larger Allen wrench to securely tighten the
two screws (see Figure 13).
NOTE
#
If the post is not at a 90º angle to the drawer, the tilt adjustment may require tightening.
Use the small Allen wrench to tighten the screws on the tilt adjustment hinge, which is
located on the underside of the drawer.
Align the key