natus OLYMPIC CFM 6000, Руководство оператора

Страница: 37 / 42

OLYMPIC CFM 6000 Operator’s Manual 31
Figure 13 Securing the foot pedal
5
Carefully turn the stand over, leveraging the handle and the base.
To place the CFM 6000 on its cart:
1
Remove the drawer from the CFM cart:
a
Open the drawer.
b
Lift the detent levers on both sides of the drawer slides as you lift the drawer up
and off the slides (see Figure 14).
Figure 14 Removing the drawer
2
Remove the tape securing the thumbscrews, and ensure that the thumbscrew spacers
are not resting on the threads. The spacers should spin freely.
3
Place the CFM 6000 on the top of the drawer enclosure, visually aligning the device
to the thumbscrews (see Figure 15). The thumbscrew heads are located inside the
drawer cavity. To maintain balance, tighten the thumbscrews incrementally in a
circular or X-pattern.
Lift the detent levers on both
sides of the drawer as you lift
the drawer up, off the slides.
NOTE
#
If the thumbscrew spacers rest on the threads, they act as a jam nut, preventing secure
placement of the CFM 6000 on the cart.