National ramp ALUMINUM SOLID, Руководство по установке

Страница: 120 / 138

TIPS AND TRICKS
The planking will change directions on a switchback platform.
While this configuration is composed of two 5'x5' platforms, when installing a 5'x8'
switchback ramp, it must start with a 4'x5' platform and then a 5'x4'.
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
SWB
21.2.4.
Mount the legs to the desired height – snug the bolts without over-tightening.
21.2.5.
Carry the ramp section over and attach the tongue side into the groove of the platform.
21.2.6.
Using the level, adjust the legs so the ramp section is level across the ramp, at the appropriate
slope, and the legs are plumb.
21.3  Set the second 6' section.
Repeat all of
Step 21.2
21.4

Set the first 5'x5' turn platform.
21.4.1.
Place the platform upright on sawhorses, with the tongue side facing forwards. Attach
universal brackets and bolts for the two (2) sets of handrails and two (2) of the three (3)
legs needed for this platform. (The switchback bracket will need to be added to hold the
third leg).
SWITCHBACK BRACKET
SWB
[ 120 ] NATIONAL RAMP
™
| FREEDOM NOW
www.nationalramp.com | 877-884-RAMP(7267)
image 115